Strengthify Collection

Strenthify is a specially designed formula with the natural nail in mind. This soak off formula has been designed to mimic the natural nail. Apply 1-2 coats to give the natural nail extra strength. If you or your clients have weak or brittle nails then Strengthify is the product for you. The self levelling gel fills in any ridges in the natural nail. Stenththify will give the natural nail protection and strength which, in turn, helps nails grow to the clients desired length.

Instructions:
– Push back the cuticle
– Remove the surface shine from the nail plate with either a 240 grit file, 240 grit sanding band or a sponge buffer.
– Shape the nails with a 240 grit file.
– Clean the nails with Clean Up Solution.
– Apply one thin layer of Base Coat and cure for 30 seconds.
– Apply two coats on Strengthify curing in between each application.
– To cure the gel, press the 99s* Low Heat setting on your Kirsty Meakin lamp.
– Place the hand with the fingertips on the edge of the metal base plate which will introduce the product to the lamp. Hold in this position for 10-15 seconds.
– Then, place the full hand in the lamp and let the lamp do the work to cure the Strengthify gel.
– Apply your chosen colour, if required.
– Finish with one coat of To Coat and cure for 30 seconds.

*The 99s button on the Kirsty Meakin lamp starts with a low power cure and gradually increases to a full power cure. When finished the product is fully cured. This reduces the risk of a heat spike.

Do not put your hand straight into the lamp. To avoid a heat spike follow the above instructions.